Omexco Khatam Sfumato Wallcovering

Home
Commercial Wallcoverings
Omexco Wallcoverings
Omexco Khatam Sfumato Wallcovering

Click to Enlarge

Omexco Khatam Sfumato Wallcovering

Please call for a price

SKU: Omexco Khatam Sfumato Wallcovering

Omexco Khatam Sfumato Wallcovering, where graphic design meets fine art, drawing out ancient lines from within the bark. The Khatam collection reveals the most beautiful characteristics of cork, a stunning natural renewable material. Soft to the touch with beautiful nuances in tone, this cork collection has a matt finish. We were inspired by the intricacy of Venetian floor patterns and the exquisite designs of Persian marquetry which fuse Eastern and Western artwork.

Choose your option:

KHA42

KHA44

KHA46

Sfumato

Order a Free Sample Request a Quote Write a review

Specifications

Composition cork

Width of the wallcovering ± 91 cm (± 35” 4/5)

Weight ± 278 g/m² (± 8,20 oz/sq yd)

Pattern repeat 0 cm (0”) and the design does not need to be matched

Fire resistant US: class A

Light resistant Xeno test 4-5

Sold by metre/yard - no minimum

Adhesive Apply a ready mixed PVA or EVA clear adhesive directly to the wall, no need to humidify the back of the wallcovering

Attention Delicate wallcovering. Never allow glue nor water to get on front of the wallcovering

Hanging reception of the material Be sure all material has the same run lot number before installation. Final inspection should be made as to correct pattern, color and any defects in craftmanship. No claims will be accepted beyond the installation of 3 strips. Absolutely no labour claims will be considered. Application of material is interpreted as acceptance of material and conditions of installation. This is a natural product, differences of color and aspect between batches are unavoidable. We cannot guarantee a perfect color match between the sample in the pattern book and the delivered goods. wallcovering - installation 1. wall preparation Ensure surfaces are clean, smooth, dry, firm and uniformly colored. Do not hang over glossy or nonporous places, stains. Painted walls should be washed down with Tri Sodium Phosphate to remove grease or soil. Glossy paint should be dulled with sandpaper. Never hang over new plaster or unprimed wall areas. For wallboard, ply or drywall, fill all cracks and prepare the surface with an acrylic basecoat. 2. preparations of strips • If your order contains several numbered rolls of one single item/reference, please first install the roll with the highest number, and then continue to install the other rolls in sequence, in descending order. • Measure and cut 3 strip lengths. Add 2” to 4” (5 to 10 cm) to top and bottom of each strip. • For printed patterns, plan your match from the roll before cutting. • Mark each strip coming from the roll on the back and hang in the same sequence. • Reverse alternate lengths when instructed to do so by label on the roll. 3. installation Apply a ready mixed PVA or EVA clear adhesive to the wall. Follow the instructions of the adhesive manufacturer. Do not use too much adhesive (about 7 ozs/sqyd - 200 gr/m2). Respect the open time recommended by the adhesive manufacturer to penetrate into the wall or to evaporate. a t t e n t i o n • Make sure the adhesive is spread out evenly over the whole surface to ensure good adhesion to the wall. This will avoid open seams. • Do not use too much adhesive to avoid seam tearing stains on the wallcovering. • Never allow the adhesive to get on front of the material. read more

i m p o r t a n t Cork is a natural, renewable product originating from the bark of the cork oak. In nature, cork shows colour variations and naturally formed layers read more