Phillip Jeffries Whispering Willows Wallcoverings

SKU: WhisperingWillows

Please call for a price

In Stock

SKU: WhisperingWillows

Phillip Jeffries Whispering Willows Wallcoverings, showcases the gentle arch and graceful curves of sweeping willow branches. Add serene beauty and effortless elegance to any space while embracing the calm of nature. This immersive, all over design is printed on beautiful, textured wallcovering grounds. Utilizing sophisticated colourations, this collection can be fully customized with more colours and grounds through our PJ Mash Up® custom program.

Choose your option:

WhisperingWillows

Specifications

Adhesive 1. We recommend a clear, pre-mixed, heavy duty vinyl adhesive. 2. Apply the paste to the back of the paper, which will become flexible and easy to hang. 3. Do not add excessive water to the paste asit may cause the backing paper to pull away from the front. 4. It isimportant to keep the face of the wallcovering free of adhesive and water.

Binder Prints

Bolt Size 12 Yards

Booking 1. Allow the paste to become tacky prior to hanging. Exact time will vary based on ground item, adhesive, temperature, humidity, etc. 2. Do not crease.

Building & Material Conditions The building must be weather-tight with HVAC settings (including pressure, temperature and relative humidity) the same as those of an occupied building for three days prior to, throughout installation and three days after installation. The walls must be structurally sound including elimination of sources of moisture accumulation into the wall or wall cavity. The wallcovering must be in a clean and dry condition and must be stored at normal occupied building temperature and humidity for at least three days prior to installation. All adhesives and primers must be new, good quality, commercial grade materials, which have not been contaminated.

CFA Availability Not Applicable

Fire Rating ASTM E84 Class A

Horizontal Repeat 34 in (86.3 cm)

Maintenance Wipe Gently

Match 1. Whispering Willow is a Drop Match 2. Pattern repeat on: Natural groundsis 36” (91.4 cm) Vertical x 34” (86.3 cm) Horizontal Vinyl groundsis 36” (91.4 cm) Vertical x 51” (129.5 cm) Horizontal 3. When printing on naturals or textiles, ground material may shift slightly. There is a slight tolerance for material not lining up and care should be taken to ensure pattern is matched visually at eye level. DO NOT REVERSE THE STRIPS.

Preparation Before you cut and hang, please be sure you have: 1. The correct wallcovering and the correct amount of wallcovering to finish the job. 2. Inspect the wallcovering carefully to ensure it is free of defects. Please note that many of our wallcoverings are handmade products and woven of natural fibers that feature subtle variations in color and texture. These are characteristics of natural and textured wallcoverings and should not be considered defects: If no defect is evident before installation, the material should be inspected after three (3) strips are installed. If any defect is evident at this time (or at any point in the installation) no additional material should be hung until Phillip Jeffries is notified. NO CLAIMS WILL BE ALLOWED FOR MORE THAN (3) STRIPS ON THE WALL. All claims must be made within 30 days of the invoice date. No labor claims will be allowed at any time.

Seaming Level II, Subtle Seaming

Shading 1. Natural grounds may be shaded onsite to create the best gradation on the walls. 2. Subtle shading differences between strips tend to soften over time as the natural textured wallcoverings begin to oxidize.

Tips 1. The walls must be properly prepared to ensure that the wallcovering will adhere. Adhesive may fail if wall surface is not properly cleaned and/or primed. 2. Use a smoother, soft brush or cloth when hanging. 3. Do not overwork the seams. 4. When printing on naturals or textiles, ground material may shift slightly. There is a slight tolerance for material not lining up and care should be taken to ensure pattern is matched visually at eye level. 5. Consider using a light painters tape to cover the edges of previously installed strips, so that the paste coming out from the seams will not settle on the installed strips. We recommend using low-tack tape and removing immediately after each piece is hung to mitigate the transfer of color. 6. For items with dark colors, consider using a mitered edge as the lighter ground color may show through when cut. If light edges can be seen, we recommend touching up seams with a similar colored marker. Be sure to test a small area before proceeding. Please use extreme care when handling this wallcovering. 7. Wallcovering may be cleaned using a soft brush attachment of a vacuum. Items on vinyl grounds are wipeable but do not scrub.

Trimming The edges are un-trimmed and will require cutting a precision edge on your worktable. Items printed on non-vinyl grounds: Trimmed width 34” (86.3 cm) Items printed on vinyl grounds: Trimmed width 51” (129.5 cm)

Vertical Repeat 36 in (91.4 cm)

Wall Preparation The walls to be covered must be properly prepared to ensure that the wallpaper will adhere to the wall surface. Even the strongest adhesive can only work when the wall surface is clean and properly prepared. Phillip Jeffries recommends that installers use a hard, acrylic, pigmented, wall-protecting primer that is SPECIFICALLY made for WALLCOVERING INSTALLATION and WALL PROTECTION

Delivery

Please see our shipping and returns page for detailed delivery

Reviews

No reviews yet